Acer G41tam Rev 10 Manual Extra Quality //top\\ -

Note: Check your specific BIOS version before installing a 95W Core 2 Quad processor to ensure thermal and power compatibility. Memory Configuration and Limitations

Connecting the case front panel cables to the motherboard is the most common reason users look for a manual. The front panel header (usually labeled or PANEL1 ) is located on the bottom right edge of the board. Pin Number Signal Name Pin 1 / 3 HD_LED_P / HD_LED_N Hard Drive Activity LED (Connect colored wire to Pin 1) Pin 2 / 4 FP_PWR_SLP / GND Power LED (Connect colored wire to Pin 2) Pin 5 / 7 RESET / GND Reset Switch (Orientation does not matter) Pin 6 / 8 PWR_SW / GND Power Switch (Orientation does not matter) Pin 9 No connection Pin 10 Missing pin for alignment orientation 4. Audio and USB Internal Headers Front Panel Audio (F_AUDIO)

This board does not support DDR2 memory, even though some G41 chipsets do. It is strictly DDR3. acer g41tam rev 10 manual extra quality

To use the headphone and microphone jacks on the front of your computer case, connect your case’s HD Audio cable to the header (typically located on the lower-left edge near the rear audio ports). This header uses a standard 10-pin block missing Pin 8: Pin 1: MIC L (Microphone Left Channel) Pin 2: AUD_GND (Ground) Pin 3: MIC R (Microphone Right Channel) Pin 4: HP_ON / NC Pin 5: LINE2_R (Headphone Right Channel) Pin 6: MIC_RET / Sense Pin 7: AF_OUT / Sense Internal Pin 8: No Pin (Key location) Pin 9: LINE2_L (Headphone Left Channel) Pin 10: HP_RET / Sense

Connects to the chassis power indicator LED. Pin 2 is positive (+), Pin 4 is negative (-). Note: Check your specific BIOS version before installing

Based on its Rev 1.0 architecture, here are the technical specifications: G41T-M｜Motherboard｜Products - ECS ELITEGROUP

Do not enable “S3/STR” sleep if using Linux 5.x kernels – causes wake-from-USB failure. Pin Number Signal Name Pin 1 / 3

4-pin pulse-width modulation (PWM) header for the processor cooler. SYS_FAN: 3-pin or 4-pin header for the exhaust case fan. Troubleshooting Common Issues 1. System powers on, but there is no display (Black Screen)

The LGA 775 socket on the Rev 1.0 board supports several 65W and 95W Intel processors. (Q6600, Q8400, Q9400 series) Core 2 Duo (E7500, E8400 series) Pentium Dual-Core & Celeron variants Installation Steps Release the socket hook and lift the load plate.