Lithium-ion batteries naturally degrade over time. If your unit is several years old, consider buying a replacement battery pack from Airbot. 8. Storage and Warranty Support
Operating the Hypersonic Pro with a wet filter will permanently damage the motor and void the warranty.
Long hair, threads, or rug fringes have wrapped around the roller bearings.
Operating continuously in Max Mode drains the battery quickly (under 15 minutes). Use Eco or Auto mode for routine maintenance cleaning. airbot hypersonic pro manual
| Error Code / Symptom | Meaning | Solution (from manual) | | :--- | :--- | :--- | | | Motor jammed or locked rotor | Check if the brush roll is stuck. Remove the brush roll and clear foreign objects. | | E2 | Suction motor overheating | Turn off the vacuum. Clean the HEPA filter. Wait 30 minutes to cool. | | E3 | Communications error between battery and motor | Remove the battery, press and hold the power trigger for 10 seconds (to discharge capacitors), then reinstall the battery. | | E4 | Battery voltage imbalance | Long charge (12+ hours). If persists, replace battery. | | Flashing red battery + beeping | Vacuum is in deep sleep mode | Plug into charger for 5 minutes to wake the battery management system. | | Vacuum runs for 2 seconds then stops | Clog in the cyclone or tube | Remove the extension tube. Check the dustbin inlet and the cyclone cone for a blockage (coin, sock, large debris). |
The Airbot Hypersonic Pro offers multiple cleaning modes to suit your cleaning needs:
He looked back at the digital manual. The final page had appeared, a simple sentence flashing in gold: Lithium-ion batteries naturally degrade over time
The Airbot Hypersonic Pro relies on a multi-stage filtration system, including a cyclone separator, stainless steel mesh, and a high-efficiency HEPA filter.
The light ring on the display changes from blue to red when higher concentrations of dust are detected. 2. Component Assembly FAQ - Help center - Airbot Singapore
Rinse the HEPA filter and mesh components under cold running water. Do not use detergents or soaps. Storage and Warranty Support Operating the Hypersonic Pro
Introduction The AirBot Hypersonic Pro is a high-performance consumer drone designed for advanced hobbyists and prosumers. This manual-style overview explains core features, basic operation, safety guidelines, maintenance, and troubleshooting in clear, user-friendly language.
Ensure the machine is turned off and the battery is removed (if applicable) before performing any maintenance, cleaning the brush roller, or clearing blockages. 2. Product Overview and Package Contents
To maintain optimal suction and longevity, regular maintenance is required: