Always simulate your toolpaths in ArtCAM 9.1 to check for errors before running the machine. 5. Exporting G-Code
Uses a large flat tool (like an End Mill) to quickly remove the bulk of waste material in flat layers.
The tool database was expanded to include additional complex carving tool shapes, including:
Once satisfied, click . Select the post-processor that matches your specific CNC machine's controller (e.g., Mach3, GRBL). ArtCAM will convert the toolpath into G-code—the numeric instructions your machine reads. artcam pro 9.1 tutorial
This tool creates flowing shapes by guiding a cross-section along two parallel lines. Select two vectors to act as your rails. Open the tool from the Relief Toolbar.
Choose "Add" (to add to the existing relief) or "Merge" (to merge shapes). 4. Introduction to Toolpaths (CNC Machining)
The main hub for commands (Vector Creation, Relief Modeling, Toolpaths). Always simulate your toolpaths in ArtCAM 9
home position. Most machinists prefer the bottom-left corner or the exact center.
Visually inspect the 3D preview for errors, gouges, or collisions. Click on .
Before creating designs, it is essential to understand the workspace layout. The interface is optimized to guide you from a 2D sketch to a 3D reality. The tool database was expanded to include additional
Navigate the workspace efficiently using:
Once you have your vectors and bitmaps prepared, you can begin generating three-dimensional reliefs using ArtCAM's powerful modeling tools.
Before creating shapes, you must define the physical dimensions of your material. Creating a New Model Open ArtCAM Pro 9.1. Click on the startup screen.