: The most common reason people hunt for v5610 is the dreaded "Ink Absorber Full" error (Error Code 5B00). Printers have physical pads to catch excess ink; once the software's internal counter hits a certain limit, the printer locks down to prevent leaks. This tool is the primary way to reset those counters after the pads have been cleaned or replaced, saving the device from the landfill.
G1000, G2000, G3000, G4000, G1400, G2400, G3400, G4400, G1010, G2010, G3010, G4010.
Turn the printer back on normally. The error codes should be gone, and the printer should be ready for standard use. Important Safety Warnings and Troubleshooting canon service tool v5610
Using service software carries inherent risks. Misuse can permanently damage your printer's logic board. Avoid Counterfeits and Malware
In the world of printer maintenance, few tools are as sought after—and as misunderstood—as the . If you own a Canon inkjet printer, particularly from the PIXMA MG, MX, or TS series, you have likely encountered the dreaded “ink absorber full” or “5B00” error. This error effectively bricks your printer until a specific reset procedure is performed. : The most common reason people hunt for
Disclaimer: This article is for educational purposes only. The author does not provide download links for copyrighted software. Always respect intellectual property laws and your printer manufacturer’s guidelines.
: Connect the printer to your PC via USB (Wi-Fi will not work in Service Mode) and launch the V5610 tool. Important Safety Warning G1000, G2000, G3000, G4000, G1400, G2400, G3400, G4400,
Turn off your printer using its physical power button (you may have to press it twice to force it down).
This occurs if the printer is not in Service Mode or if the tool cannot communicate with the printer. Try restarting the printer and computer, and change the USB port.
Exit the tool. Unplug the printer for 10 seconds. Reconnect. The error should be gone.