Digi Sm 5000 Scale User Manual -

Slide a new roll of thermal labels onto the supply spindle, ensuring the adhesive side faces up.

Access the menu to assign frequently used items to specific touch buttons on the home screen for faster customer service.

Enter the programming mode and navigate to the screen. digi sm 5000 scale user manual

Feed the leading edge of the liner through the sensor mechanism and around the rewind roller (if using die-cut labels with backing paper).

Proceed with normal product weighing. The scale automatically subtracts the 15 grams. Selling Non-Weighed (By-Count) Items Slide a new roll of thermal labels onto

Thread the label backing through the feed rollers and over the peel bar. Close the print head firmly until it clicks into place. Press the key to align the first label. 3. Basic Operations

Used to type PLU numbers, unit prices, tare values, or programming codes. Feed the leading edge of the liner through

: Guidance on integrating the scale with printers and systems via connections. Calibration & Maintenance

Press the >0< (Zero) key to clear any residual weight.

Wipe the touchscreen display with a damp microfiber cloth. Do not use harsh chemical solvents or abrasive pads. 6. Troubleshooting Common Issues Probable Cause Recommended Action Power cord unplugged or faulty outlet.

Use the T key to subtract the weight of containers or packaging. Operation Modes 1. Sales Mode (Registration) This is the default screen for daily transactions. Place the item on the scale.