Dvb Select Type Error Samsung Tv » <RECENT>

Press the button on your remote and switch the TV to TV Mode (Live TV). Open Settings and go to Broadcasting . Look for Channel Setup or Tuning Settings .

He punched in the code: Info, Settings, Mute, Power.

Warning: Accessing the Service Menu can brick your TV if settings are changed incorrectly. dvb select type error samsung tv

If the problem persists after these steps, the issue may not be with the TV, but rather with the incoming signal.

A loose coax cable can prevent the TV from detecting the signal, triggering configuration errors. Unplug the coaxial cable from the "Antel In" or "Cable In" port on the back of the TV. Check the center pin to ensure it is straight, then screw it back in tightly. Change the Source Input Press the button on your remote and switch

: Ensure the central pin of the coaxial cable is straight and not bent.

Sometimes the TV gets stuck on this error because the internal region setting does not match your actual geographical location, causing the tuner to look for the wrong frequencies. He punched in the code: Info, Settings, Mute, Power

Elias groaned. He wasn't using a satellite dish; he was on cable. The TV was treating the internal tuner like it was searching for a signal from space, ignoring the HDMI ports entirely. He felt that familiar rise of technological panic—the fear that the device was broken, that he would have to call support, that he would spend hours on hold only to be told to buy a new one.

Disclaimer: This article is for informational purposes only. Always consult your TV's manual for model-specific instructions. Share public link

If you have tried all the steps above and your Samsung TV still forces the "DVB Select Type" screen without saving your selection, your TV's internal digital tuner may have suffered hardware degradation. In this scenario, using an external set-top box or contacting Samsung Support for a mainboard inspection is recommended.