Fix Firmware Ml2165 Ml2168 Chip Reset Printer Samsung 676 Link ((exclusive)) «2025-2026»

(An 11-digit serial number belonging to the current toner chip) Printer Serial Number (A 15-digit alphanumeric code) How to Print Reports on ML-2165 / ML-2168:

: Hold the Print Screen / WPS button (above power) for about 10 seconds until the LED flashes once, then release. Note the Serial Number (SN) and Firmware Version .

| Problem | Solution | |---------|----------| | "File is corrupted" during downgrade | Redownload firmware from a different source. The file should be ~4MB. | | Printer not detected in reset tool | Install Samsung Universal Print Driver first. | | Error returns after 10 pages | The cartridge chip is permanently dead. Replace the chip (buy 10-pack for $5 on eBay). | | "676 link" shows after downgrade | Clear NVRAM: Turn off printer; hold Stop + Cancel + Power for 15 seconds. |

The LED should turn green/orange or stay solid, indicating it's ready. 3. Flash the Firmware (676 Link Process) Extract the fix firmware file you received. (An 11-digit serial number belonging to the current

Purchasing original cartridges or replacement chips for every refill becomes expensive. A permanent firmware modification (often referred to as a "fix firmware" or "reset link" solution) allows you to bypass the chip entirely, enabling endless refills at a fraction of the cost. Understanding the Samsung Toner Chip Problem

FIX_NU_Serial_ML2165_V1.01.0X.XX.hd (The custom firmware file mapped to your CRUM/Serial) Step 3: Preparing the Printer for Flashing

Drag and drop the .hd firmware file onto the usbprns2.exe file. The file should be ~4MB

Disclaimer: Firmware flashing can carry risks. Always follow instructions precisely to avoid damaging your printer. What is a Fix Firmware Reset?

Press and hold the button (above the power button) for about 10–15 seconds until the green light flashes rapidly, then release it.

Samsung ML-2165 and ML-2168 laser printers are highly reliable machines, but they come with a built-in limitation: page-counter toner chips. When the printer decides the toner is empty based on page count—even if there is plenty of powder left—it locks you out. Replace the chip (buy 10-pack for $5 on eBay)

: The printer's LED will flash (usually orange) for 1–5 minutes. Do not turn off the printer during this time.

: Hold the Print Screen / WPS button for about 15 seconds until the LED stays green, then release. Look for the CRUM number , an 11-digit identifier for your current cartridge chip. Step 2: Downloading the Firmware Fix

Once you fix the firmware/chip reset, follow these rules:

the .hd file directly on top of the usbprns2.exe icon.

If after downgrading firmware and replacing the chip the printer still shows , the mainboard’s NVRAM may be permanently corrupted. These printers are disposable by design. A used replacement Samsung M2020 costs less than a new cartridge + chip. Consider retiring the unit.