Hisilicon | Kirin 710 Flash Tool =link=

: You must force the device into "HUAWEI USB COM 1.0" mode. This often requires disassembling the phone to short two specific contacts on the motherboard, though some tools like Smart-Clip2 offer a "Software Testpoint" feature to avoid opening the casing.

The storage chip (eMMC/UFS) may have suffered physical wear or hardware damage, a common issue on older mid-range chips.

TTool Pro: Supports reading device information and repairing PCBA or country codes.

These tools typically operate in mode (also known as EDL or Emergency Download Mode), which is a low-level service mode for repairing deeply bricked devices. Top Recommended Tools for Kirin 710 (2026 Updated) 1. Kirin-Tool v2.2 (Recommended Free Option) hisilicon kirin 710 flash tool

: Devices feature unique partitions like xloader , fastboot , and rescue that require precise sequencing during execution.

Power off the phone, put it in COM 1.0 mode (using software or physical test point). Connect: Connect the device to your PC via USB.

Download IDT Tool and the USB COM drivers . Practice on a donor phone. Understand that one wrong click can turn your Kirin 710 into a paperweight. : You must force the device into "HUAWEI USB COM 1

The is a popular mid-range mobile chipset found in devices like the Huawei P20 Lite, Nova 3i, Honor 8X, and Mate 20 Lite. While these devices are known for their reliability, software issues such as boot loops, FRP locks, or failed OTA updates can occur. When this happens, you need a Flash Tool .

If your device has the Kirin 710 (not 710F or 710A), the same flash tool works.

Here are the key tools and methods you'll use to flash or repair your Kirin 710 device: TTool Pro: Supports reading device information and repairing

Unlocking the bootloader is often the first step before you can flash custom software.

To perform low-level flashing on a Kirin 710 device, you must first boot it into . This is a factory service mode that allows direct communication with the processor. There are two ways to enter this mode:

In all these cases, a specialized flash tool designed for HiSilicon Kirin chipsets is necessary. The Kirin 710 presents unique challenges due to its mechanism and the need to enter USB COM 1.0 mode (also called VCOM mode) for low-level access.