Huawei Atn 910d-a Datasheet Info

| Category | Supported Protocols / Features | | :--- | :--- | | | Static routes, OSPF, IS‑IS, BGP, etc. | | MPLS & VPNs | Layer 2/Layer 3 MPLS VPN, EVPN | | Segment Routing | SRv6 (tested in multi‑vendor environments), SR‑MPLS | | Slicing & QoS | Hard slicing (FlexE) and soft slicing (VPN), hardware isolation, 0 pre‑emption | | High‑Precision Timing | 1588v2 (OC/TC/BC full mode), G.8275.1, 1588 ACR, E1 line clock, Synchronous Ethernet | | High Availability / Protection | IP FRR, LDP FRR, TE FRR, VPN FRR, TI‑LFA, hardware BFD | | OAM | iFIT (in‑flow performance measurement) |

If you need a specific or software version for this router: Tell me your current firmware version (e.g., V800R012).

High-precision time and frequency synchronization over packet networks.

Supports traditional MPLS (LDP, RSVP-TE, L3VPN) alongside modern Segment Routing (SR-MPLS / SRv6) architectures. This allows network evolution toward automated, software-defined traffic engineering. Quality of Service (QoS) Huawei Atn 910d-a Datasheet

The ATN 910D-A is a fixed-configuration router housed in a metal chassis, designed for standard 19-inch and 21-inch equipment cabinets. This compact form factor allows for high-density deployments in space-constrained central offices and equipment rooms.

These dates allow network planners to align their hardware refresh cycles and support contracts with the product’s official lifecycle.

In the server room three floors down, the hum of the existing infrastructure was a discordant whine. The team wheeled in the crates. The ATN 910D-A units were surprisingly compact, fitting standard 19-inch racks, but their density was deceptive. | Category | Supported Protocols / Features |

Features an 800Gbps to 880Gbps system capacity, which is exceptionally high for its 1U form factor.

BGP4, OSPFv2/v3, IS-ISv4/v6, RIPv1/v2, and static routing.

But the usage line stayed flat.

: 800 Gbps (some sources specify 880 Gbps). Interface Density : 28 total ports: 4 x 100GE / 50GE 16 x 25GE / 10GE / GE 8 x 10GE / GE / FE Dimensions : 442 mm (W) x 220 mm (D) x 44.45 mm (1U H). Weight : Approximately 4 kg. Operating Temperature : -40°C to +65°C. Power Supply : Dual DC/AC inputs with 1+1 redundancy. Typical Power Consumption : 180W. 🛠️ Advanced Features

Given its high capacity and feature set, the ATN 910D-A is ideally suited for several demanding scenarios: