: Ensure you are using the correct version of the software for your specific TC-580 hardware revision.
This documentation will be invaluable when troubleshooting or expanding your radio system.
Click on the "Channel Information" tab. Here you can edit frequencies, power levels (High/Low), and tone settings. Hyt Tc-580 Programming Software
Acquiring the correct software is the first step. While older radios sometimes allowed free downloads, the official, most reliable version is often accessed through authorized dealers or Hytera's Download Center .
Connect the cable to your PC before opening the software. Windows will usually install the drivers automatically, but if not, you may need to install a Prolific or FTDI USB-to-Serial driver. 2. Connect the Radio Turn the radio . Plug the programming cable into the mic/speaker jack. Turn the radio ON . 3. Open the Software and Read from Radio Open the HYT TC-580 programming software. : Ensure you are using the correct version
For reference, here are the base specifications for the HYT TC-580 radio:
This is the standard mode used with the HT580E Programming Software. The radio enters this mode automatically when it detects a valid connection to a PC via the programming cable. In this mode, you have full access to all configurable parameters, including both User Version and Factory Version settings. Here you can edit frequencies, power levels (High/Low),
⚠️ Manual programming may not be available in certain countries or regions. Check with your local dealer if this feature is enabled on your radio.