E54 03 Over Flooding Toilet Pooping Updated | Jade Evo

Ensure the water line inside the tank aligns with the manufacturer's mark. If the fill valve fails to shut off, water continuously pours into the overflow tube.

Wipe down the motion and seat sensors weekly using a soft microfiber cloth to prevent ghost-flushing or delayed cycles.

If the toilet is full, use a manual plunger to create suction or a bucket to remove water before attempting repairs.

Crank the handle clockwise while pushing downward to extend the snake into the trapway until you hit the obstruction. jade evo e54 03 over flooding toilet pooping updated

If the flooding occurs specifically when the toilet is trying to flush waste:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

What housing is utilizing the Jade controller? Ensure the water line inside the tank aligns

Give a final, forceful "pull" upward. Often, it is the suction pulling the clog back that breaks it up better than pushing it further down. 4. Maintenance to Prevent Future Flooding

To help diagnose why your toilet is clogging so frequently, let me know:

Do not use a flat sink plunger. You need a plunger with an extended rubber lip (flange) at the bottom that fits securely into the Jade Evo’s drain opening. If the toilet is full, use a manual

Wipe the seal clean or replace it if it looks warped or blistered. 2. Adjust the Fill Valve If the water won't stop running into the overflow tube: Locate the adjustment screw on the fill valve. Turn it counter-clockwise to .

Adjust the float height so the water level sits approximately one inch below the top of the overflow tube.

: Prop up the float ball or cylinder inside the tank to trick the toilet into thinking it is already full. This stops the tank from refilling. 🛠️ Step 2: Clear Heavy Solid Waste Clogs