Here is the standard pinout for connecting the simulated RC522 to an Arduino Uno in Proteus:
: Automating student or employee tracking. Smart Door Locks : Providing secure, keyless access control.
It includes a matching virtual RFID tag companion model, allowing you to simulate the actual swiping of a card. 2. Gadgetronicx RC522 Simulation Model rc522 proteus library top
Simulating Radio Frequency Identification (RFID) systems in Proteus ISIS saves significant hardware prototyping time. The RC522 RFID module, which operates at a high frequency of 13.56 MHz, is the industry standard for budget-friendly security, access control, and inventory tracking systems.
If you meant instead of "top" (e.g., "RC522 Proteus library tip" ), here's a useful one: Here is the standard pinout for connecting the
Since Proteus doesn't come with an RC522 model, you will need to source a third-party library. As a general rule, always prioritize that include a .HEX (firmware) file and simulation instructions, as these are the most likely to work out-of-the-box.
The SPI timing might be off. Reduce the SPI clock speed in your Arduino code. Add this after mfrc522.PCD_Init() : If you meant instead of "top" (e
Ensure your firmware pin declarations ( SS_PIN and RST_PIN ) match the physical schematic wires exactly. Reverse lines on MISO/MOSI will completely break data streams.