Renolink Key Card Programming Jun 2026

Follow the on-screen prompts to insert the (your existing working card, if you have one). Click "Next" and insert the new virgin card when prompted.

Before beginning the programming process, ensure you have the following:

Before beginning, you must gather the correct equipment. Using counterfeit or incompatible hardware can result in communication failures and potentially brick your vehicle's UCH module.

You will see a list of current keys (e.g., "Key 1: Active," "Key 2: Inactive"). Select "Program new key" or "Add Key." Pro tip: Avoid "Re-initialize all keys" unless the customer lost all keys, as this requires reprogramming every single card they own. renolink key card programming

The transponder chip was not successfully programmed, or you purchased the wrong frequency card. Re-run the programming sequence.

Source a certified virgin chip card matching your exact OEM part number. 🔒 Safety and Legality Warnings

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Follow the on-screen prompts to insert the (your

Fix: Check your Windows Device Manager to ensure the FTDI drivers for your OBDLink cable are properly installed. Make sure the ignition is fully turned on.

As vehicles continue to evolve with increasingly sophisticated electronic systems, the ability to perform these procedures independently will only become more valuable. Renolink stands ready to meet this challenge, providing the tools and capabilities needed to keep your Renault or Dacia vehicle secure and functional for years to come.

Turn the vehicle's ignition using an existing working key card (if available). If all keys are lost, insert the blank card into the slot to awaken the dashboard. Click the Read or Scan button in Renolink. Using counterfeit or incompatible hardware can result in

Click . Verify that the status bar turns green, indicating active communication with the vehicle. Step 2: Read the Vehicle's UCH Module

: