or turn off the computer during this phase. Step 5: Reboot and Verify
Try a different USB port on your PC (ideally a USB 2.0 port). Recheck Device Manager to confirm the driver is active.
To help me provide the exact files or steps for your device, tell me: satlink ws-6933 software update
or turn off the device until the progress bar reaches 100% and a "Success" message appears. Once finished, restart the meter. Go back to System Setup to verify the new version number. Fujian Satlink Electronics Co., Ltd. 3. Updating the TP (Transponder) List
Ensure you use a high-quality data cable, not a cheap charging-only cable. or turn off the computer during this phase
Adds newly launched satellites to your default selection list. Prerequisites: What You Need Before Updating
Select the correct that you identified in Step 1 and click Next . Choose the option "Download to device" . To help me provide the exact files or
This comprehensive guide covers everything you need to know about upgrading your device safely. Why You Must Update Your Satlink WS-6933
By using this manual editor, you can keep your meter's satellite data current without the hassle and risk of finding and applying a full software update. This is by far the safest and most reliable method for most users.
| Problem | Likely Fix | |--------|-------------| | “USB Not Supported” | Reformat USB to FAT32 (not exFAT/NTFS). Try a 4GB or 8GB drive. | | Device won’t turn on after update | Firmware mismatch. You may need a recovery file via RS-232. | | Update stuck at 0% | Corrupted file. Re-download and copy again. | | Remote control unresponsive after update | Perform factory reset. |