: Connect the power cord and press the power button on the top left. Connect Probe : Attach your BNC probe to the CH1 input jack.
to download the PDF user manual, as well as necessary software and drivers. Key Specifications Bandwidth: Sampling Rate: 1 GSa/s real-time. Memory Depth: 10K sampling points per waveform. 7-inch TFT color LCD with 800 x 480 resolution. Vertical Sensitivity: 1mV/div to 5V/div. Time Base Range: 2ns/div to 1000s/div. www.hanmatek.cn Operational Highlights Probe Compensation:
Before taking measurements, you must calibrate your probes to ensure accuracy. Connect the Probe: Attach your probe to Channel 1 (CH1). Attach to Probe Comp:
Choose the types of measurements you want to display on screen simultaneously (e.g., for Peak-to-Peak Voltage, Frequency , Period , Vmax , Vmin , or Rise Time ). Manual Measurements with Cursors hanmatek dos1102 manual
Ensure the unit is properly grounded through the supplied three-prong plug to prevent electric shock.
Frequency, Period, Vrms, Vmax, Vmin, Vpp, Rise Time, Fall Time. 5.2 Cursor Measurement Press CURSOR to enable manual, precise measurements:
The front panel is divided into four main logical sections: Vertical, Horizontal, Trigger, and the Run Control/Menu system. : Connect the power cord and press the
Adjust the trigger level or change the trigger mode (e.g., to Edge trigger). PC Connection Fails: Verify that the correct drivers are installed from the Hanmatek Support Site and try a different USB cable. or more details on performing specific measurements Digital Storage Oscilloscope with 2 Channels 110mhz DOS1102
Moves the waveform left or right, allowing you to view pre-trigger or post-trigger data. 3. Trigger System Controls
Beyond basic measurements, the HANMATEK DOS1102 includes sophisticated analysis tools that turn it into a versatile instrument for deeper signal investigation. Vertical Sensitivity: 1mV/div to 5V/div
Edge trigger is standard, but you can also choose Video or Pulse triggers.
If your waveform is not stable, it is a trigger issue. Press the button.